Power Supply

Robust units that convert line voltage into stable, regulated DC power (typically 24V) to safely run sensitive electronics and control circuits.

Siemens | SITOP Power Supplies

Siemens SITOP units are known for their “complete integration.” Beyond just providing power, the advanced series can communicate directly with your PLC to report energy usage, load status, and temperature, allowing for predictive maintenance before a failure occurs.

SITOP PSU6200

Model Number: 6EP3336-7SB00-3AX0 (24V / 20A)

Diagnostic LED interface; high efficiency (up to 96.6%); 1.5x extra power for 5 seconds.

Key Technical Specifications:

  • A front-facing LED “traffic light” shows the load level and remaining service life at a glance.

  • Designed to withstand high voltage surges and fluctuations without tripping or damaging downstream electronics.

  • Features “Push-in” terminals that speed up cabinet wiring and provide high vibration resistance.

SITOP PSU8200

Model Number: 6EP3336-8SB00-0AY0 (24V / 20A)

Wide-range input for global supply systems; 3x rated current “Power Boost” for heavy loads.

Key Technical Specifications:

  • Delivers up to 3 times the rated current for short periods to start motors or large capacitive loads.

  • Ultra-wide input range allows the same unit to operate on 120V, 230V, or 480V networks worldwide.

  • One of the narrowest footprints in the “Advanced” class, leaving more room for PLCs and I/O.

PULS | DIMENSION Series

PULS is a specialist manufacturer that focuses only on power supplies. Their DIMENSION family is the industry leader in power density (Amps per mm of rail space) and is often sourced when a facility needs to upgrade power capacity without expanding their existing control cabinets.

DIMENSION CP-Series

Model Number: CP20.241 (24V / 20A)

World-record efficiency (up to 95.5%); 20% power reserves; extraordinarily small width.

Key Technical Specifications:

  • Electronic inrush limitation prevents “nuisance tripping” of circuit breakers during startup.

  • Optimized thermal management results in an electrolytic capacitor lifetime of over 50,000 hours.

  • Built-in “Current Sharing” feature allows multiple units to be connected for N+1 redundancy systems.

DIMENSION Q-Series

Model Number: QS20.241 (24V / 20A)

50% “Bonus Power”; high immunity to transients; integrated DC-OK relay contacts.

Key Technical Specifications:

  • Provides a continuous power reserve that can be used for up to 4 seconds for peak load requirements

  • Advanced overload protection that provides high peak current for fuse tripping, then enters a safe protection cycle.

  • Integrated Active Power Factor Correction ensures clean power draw and reduces reactive power costs.

Sourcing for robust power supply?

Our solutions empower you to optimize efficiency and bolster reliability.

Get in Touch